STAHLWERK WELDING MACHINE MIG 155 ST IGBT

PLN 929.99
sold out

The STAHLWERK MIG-155 ST gas-shielded arc welder works with up to 155 amps and is suitable for both MIG/MAG welding and MMA welding with an electrode. One advantage of this compact welding machine, which weighs just 11.6 kg, is that flux cored wire can be used. This means that even thin sheets can be welded without shielding gas. In addition to smart cooling with integrated overheating protection, the combi welder has a synergic wire feed. The speed of the wire feed is automatically regulated by the set welding current. Thanks to advanced IGBT technology and extensive functions, the MIG-155 ST welding machine is powerful and reliable. The MIG-155 ST is supplied with a comprehensive accessory package.

The STAHLWERK MIG-155 ST gas-shielded arc welder works with up to 155 amps and is suitable for both MIG/MAG welding and MMA welding with an electrode. One advantage of this compact welding machine, which weighs just 11.6 kg, is that flux cored wire can be used. This means that even thin sheets can be welded without shielding gas. In addition to smart cooling with integrated overheating protection, the combi welder has a synergic wire feed. The speed of the wire feed is automatically regulated by the set welding current. Thanks to advanced IGBT technology and extensive functions, the MIG-155 ST welding machine is powerful and reliable. The MIG-155 ST is supplied with a comprehensive accessory package.

Technical Data

Output current MIG/MAG / MMA 40-155 A

Protection class IP21S

Mains voltage 230 V AC (+-15%) / 1 ~ (single phase)

Mains frequency 50/60 Hz

Maximum mains current (I1max) MIG/MAG / MMA 25.1 A / 30.3 A

Maximum effective mains current (I1eff) MIG/MAG / MMA 8 A / 9,6 A

Weight 11,6 kg

Dimensions L x W x H (mm) 450 x 240 x 370

Mains connectionCEE 7/7 Schuko plug

StandardsIEC 60974-1; EN 60974-10 (Class A)

Scope of delivery

  • 1 x STAHLWERK MIG 155 ST IGBT welding machine

  • 1 x Professional MIG welding torch AK-15 / 3 meter hose package with Euro central connection

  • 1 x 3-piece MIG accessory set (this is already pre-assembled on the torch):

    • 1 x gas nozzle

    • 1 x contact tip 0.8mm

    • 1 x gas nozzle holder

  • 1 x earth cable 3 meters (ø 25 mm²)

  • 1 x electrode holder 3 meters (ø 25 mm²)

  • 1 x connection set for pressure reducer

  • 2 x contact tip (0.8 / 1.0 each)

  • 1 x installation wrench

  • 1 x wire brush

  • 1 x Gas connection hose with quick coupling 5 meters

  • 2 x wire guide roll 0.8 mm/1.0 mm (1 x already installed in the device)

  • 1 x wire guide roll 0.6 mm/0.8 mm

  • 1 x protective cover